The Professional finish (Silver)
Our sign framing comes cut and mitred ready for simple and easy assembly, the framing is suitable for both indoor and outdoor use. To fit the sign frame simply drill through the rear of the frame in appropriate places, then mark your wall / surface through the holes. Drill and plug it to your wall or surface. Fix the two longer edges and one end securely, your signs slides in from the open end and then you secure your end piece to the secured frame. We provide everything needed except the wall screws and plugs as this will vary depending on what you’re mounting your sign frames onto. Sign frames are only suitable for either 3mm or 5mm thick signs i.e. 3mm Dibond, 5mm foamex or 5mm acrylic
Work out the total length around the edge of your signs (in mtrs) to order the correct size, i.e. 2x length + 2x height.
HFE include the following as standard
- Cut and mitred to fit your sign
- Everything included except wall screws and plugs
- 3mm or 5mm framing available
- Aluminium rust proof material
- Easy & secure online ordering
- Rapid delivery to any UK address
- Exceptional customer support
- Hundreds of HFE Signs TrustPilot Reviews
Email Sales & Design Team
If you are ordering a sign frame without a sign, please specify the accurate sign panel sizes in the instructions box as you proceed through the checkout.
NOTE: Care must be taken when sliding printed panels into frames to prevent scratching.
